More fun on weekends with the right home cinema

Having a home cinema is no longer exclusivity for those who have a lot of money. Nowadays, with increasingly affordable LCD and LED TVs and simple receivers and receivers priced under the $ 500 range, many people are gradually realizing that there are many advantages to having home theater systems at home.

However, in order for the final result of the combination between your TV set, Blu-ray player and speakers to be as good as possible, you should be aware of some options before purchasing. Observe your environment; equipment characteristics and cost-effectiveness of the acquisition are some of the tips.

Analyze the environment before buying your home cinema

Before buying your equipment, the first place you should note is the environment in which it will be placed. Is your TV room huge or will the speakers are in a small, cramped environment? It’s no use thinking of a very powerful device if you will not have the opportunity to use at least half of its capacity.

So, look for a home cinema that can be adapted to your environment. Do not fall into the common mistake of doing the opposite; try to adapt the environment to the device you just bought. Before you shell out any amount whatsoever, plan where the seats will be, so you have in mind how the unit will work after it is installed.

The first step: the TV

Planning, in this case, is the keyword. If you already have a quality TV and want a home cinema just to complement it, then the situation is easier: just choose a home theater depending on the characteristics of your device. However, if you are still going to buy a television, but you already want an HT in your home, you may want to reconsider your decision.

An example: If you currently own a normal home theater, but are planning to buy a 3D TV, know that it is very likely that you will also have to change your HT so that everything works perfectly. If there is some kind of incompatibility, the result may be a low sound or the limitation of some features.

Power and impedance

If you already know the size of your environment and you are familiar with the model of TV that will receive the home theater systems, it is time to keep an eye on the power of the device. Remember that nothing is going to happen to have an equipment with very high power if, most of the time, you will not be able to use even 50% of its capacity.

Also pay attention to the type of power described by the manufacturer. You will find home theater systemswith PMPO and RMS specifications. The first is a larger and flashier number, but that says very little about the actual power of the product. So leave it in the background. Take into consideration watts RMS, a smaller number, but which is accepted worldwide to measure the power of amplifiers, receivers and derivatives.

Impedance is another item that should be taken into consideration if you purchase the speakers separately. Varying between 2 and 16 ohms, the speakers must always match the impedance of the receiver, otherwise they may burn (receiver with impedance greater than the boxes) or reproduce sound with up to 60% less power (receiver with impedance less than the boxes).

The bottom line

With these tips you should be able to make the best out of your home theater systems!

http://thejuicerie.com

css.php